Employer Ledger

States › Alabama › Transportation Equipment Manufacturing

car tech

Opelika, Alabama · NAICS 336370 · 165 employees reported · 8 federal records

OSHA: 4 insp.Injuries: 3 yrLabor: no recordImmigration: 4 PERMContracts: not listed

Across the sources on this site, car tech (Opelika, Alabama) appears in 4 OSHA inspections, 4 PERM applications and 3 years of injury summaries.

OSHA opened 4 inspections at car tech sites in Alabama since 2016, issuing 14 citations, 8 of them classified serious, willful or repeat. Current penalties total $15,450 (initially $24,141), $3,863 per inspection, close to the national figure of $3,754. No citation is recorded as contested.

On its 2025 Form 300A summary the employer reported 157 employees and 9 recordable cases, a total recordable case rate of 3.5 per 100 full-time workers, about the same as the pooled rate for its industry (2.9; median establishment 2.1).

OFLC records 4 PERM labor certification applications from the employer with a median offered wage of $59,415; the employer reported 107 employees on payroll.

OSHA Occupational Safety and Health Administration

Citations may be contested; the status shown reflects the record at the data date. Enforcement data through 14 Sep 2026.

4inspections since 2016
14citations issued8 serious, willful or repeat
$15Kcurrent penaltiesinitial $24K
0inspections with a contested citation3 with final orders on all

Inspections by year

20192020
Inspections opened per year; 2019: 13 citations, $15K · 2020: 1 citations, $150.

Compared with industry, state and nation

MeasureThis employerNAICS 336AlabamaUS
Citations per inspection3.52.01.91.9
Current penalty per inspection$3,863$5,702$6,538$3,754
Share of inspections with a contested citation0%—3%8%
Share of inspections with final orders on every citation75%—67%56%

Inspections with no citations count as "issued" with zero citations. Industry and state figures cover every inspection in the enforcement data since 2016, including employers without a page.

Citations by standard

StandardSubjectCitations
1910.95Occupational noise exposure7
1910.1200Hazard communication4
1910.147The control of hazardous energy (lockout/tagout)1
1910.212Machinery and machine guarding, general requirements1
1910.242Hand and portable powered tools and equipment, general1

Standard numbers as the record labels them (29 CFR section; 5(a)(1) is the General Duty Clause). State-plan agencies such as Cal/OSHA cite their own codes, which appear here as recorded. Counted from the first twelve citations of each inspection.

Inspections

OpenedTypeScopeCitationsCurrent penaltyStatusCited standards
7 Dec 2020Follow-up · HealthComplete1 (1 S/W/R)$150Final order1910.95(l)(1) (Repeat)
7 Dec 2020Follow-up · SafetyComplete0—Case closed
1 May 2019Referral · HealthPartial10 (4 S/W/R)$4,300Final order1910.95(c)(1) (Serious), 1910.95(d)(1) (Serious), 1910.95(g)(1) (Serious), 1910.95(k)(1) (Serious), 1910.95(i)(3), 1910.95(l)(1) … +4
23 Apr 2019Planned · SafetyComplete3 (3 S/W/R)$11,000Final order1910.147(c)(4)(ii)(b) (Serious), 1910.212(a)(1) (Serious), 1910.242(b) (Serious)

Status is per inspection: "Contested" when any citation has a contest date and "Final order" when every citation has a final order date; "Issued" otherwise. Violation types: S serious, W willful, R repeat. Each date links to the inspection detail on osha.gov.

Injuries OSHA Injury Tracking Application, Form 300A

Establishments submit their own Form 300A summaries; OSHA publishes the data as submitted and does not verify it. Rates are per 100 full-time workers (cases × 200,000 ÷ hours worked). Calendar years 2023–2025.

3.5total recordable case rate, 2025industry median 2.1
3.5DART rate (days away, restricted or transferred)industry 2.0
157employees reported, 20251 establishment
9recordable cases, 20250 deaths, 4 with days away

Injury rate vs industry

This employer3.5
Industry median (336)2.1
Industry overall2.9
Alabama overall2.9
All establishments3.5

Total recordable case rate for 2025. The industry median is the median rate across establishments with at least 20,000 hours in NAICS 336 (quartiles 0.3–4.6); "overall" rates pool all hours and cases.

By year

YearEstablishmentsEmployeesHoursDeathsDays awayRestricted/transferOtherTRC rateDART rate
20231105275,23305305.85.8
20241165416,49502201.91.9
20251157517,96904503.53.5

Figures sum every establishment filed under this employer name in Alabama. Rates are blank where fewer than 2,000 hours were reported.

Labor Wage and Hour Division

The Wage and Hour Division publishes concluded compliance actions since fiscal year 2005; amounts are back wages the employer agreed to pay and civil money penalties assessed, as recorded at case conclusion. Data through 15 Jun 2026.

No concluded Wage and Hour Division compliance action names this employer in Alabama in the data since fiscal year 2005.

Immigration Office of Foreign Labor Certification

Employer-specific case information was provided to OFLC by employers who submitted foreign labor certification applications. These are not employer responses to the Bureau of Labor Statistics' survey. Wage levels I–IV are as the employer stated on the application. LCA data through 30 Jun 2026; PERM through 30 Jun 2026.

No labor condition application from this employer in Alabama appears in OFLC disclosure data for fiscal years 2025–2026.

PERM labor certification (green card sponsorship)

4PERM applications, FY2024–2026
100%certified0 denied, 0 withdrawn
$59,415median offered wage
107employees on payroll, as stated
FY2024FY2025FY2026 (to date)
PERM applications by fiscal year of decision; FY2024: 1 certified, 0 denied · FY2025: 1 certified, 0 denied · FY2026: 2 certified, 0 denied. FY2024 covers the new Form 9089 only; the latest fiscal year is partial.

Top PERM job titles

Job titleApplications
Technical Sales Manager1
Mechanical Engineer1
CMM Scientific Technician1
Maintenance Manager1

PERM occupations

OccupationApplications
Mechanical Engineers1
Mechanical Engineering Technologists and Technicians1
First-Line Supervisors of Mechanics, Installers, and Repairers1

Contracts USAspending.gov

USAspending recipient totals are federal contract obligations reported by awarding agencies for the latest twelve months; a recipient profile is a company-level record, not a per-state one. Retrieved 1 Oct 2026.

Not among the top 3,903 federal contract recipients loaded from USAspending for the latest twelve months. Smaller awards can be searched on USAspending.gov.

Questions and answers

Has OSHA inspected car tech?

Yes. OSHA records 4 inspections at car tech sites in Alabama since 2016, most recently opened 7 Dec 2020.

Were there penalties, and are they final?

14 citations with current penalties totalling $15,450. 3 inspections have a final order on every citation, 0 have a contested citation and 1 is recorded as issued. Citations may be contested; the status shown reflects the record at the data date.

Did the Labor Department find back wages due from car tech?

No concluded Wage and Hour Division compliance action names car tech in Alabama in the data since fiscal year 2005.

Does car tech sponsor H-1B workers, and at what wages?

No labor condition application from car tech in Alabama appears in OFLC disclosure data for fiscal years 2025–2026. LCAs are filed by the employer's headquarters state, so a subsidiary or another state's entity may hold the filings.

Does car tech sponsor green cards (PERM)?

OFLC records 4 PERM applications in fiscal years 2024–2026, 4 of them certified.

Does car tech hold federal contracts?

It is not among the top federal contract recipients loaded from USAspending; smaller awards are not covered on this site.

Have there been union elections at car tech?

NLRB election results are not loaded on this site at present, so this page cannot say either way. The NLRB publishes recent election results and a case search on nlrb.gov.

Is this the same company as the one I am looking for?

Records are matched by normalised name and state. Subsidiaries, franchisees and other states' entities have their own records. See the methodology for how matching works.

Provenance

OSHA inspections and violations: US Department of Labor enforcement data, data.dol.gov, through 14 Sep 2026, inspections opened since 2016. Injury summaries: OSHA Injury Tracking Application Form 300A data, calendar years 2023, 2024, 2025. Wage and Hour compliance actions: data.dol.gov, concluded cases through 15 Jun 2026. LCA and PERM: OFLC disclosure files, fiscal years 2025–2026 through 30 Jun 2026. Federal contracts: USAspending recipient API, latest twelve months at 1 Oct 2026. NLRB election results are not loaded in this build. US government works, public domain; USAspending data is released under CC0. Page built 1 Oct 2026; errors in processing are corrected at the next build (corrections). Disputes about a record go to the agency that holds it.